Skip to content

Installed byDezire Metal Roofing

Colorbond or Zincalume: Which Steel Suits Your Roof

One is bare coated steel and the other is the same kind of steel with paint baked on. What that changes on your roof, from glare and heat to the metals it can sit next to.

Written by
Sydney Metal Roof Replacements
Published
Reading time
7 minutes
Ridge capping running the length of a new pale grey steel roof, screws in a line along each side, houses and trees beyond

Overview

Summarise with AI
ChatGPTClaudeGeminiPerplexity

Opens the assistant with a summary prompt. Gemini does not accept a prompt in the link, so paste it there.

Zincalume is BlueScope's bare steel with an aluminium, zinc and magnesium coating, and Colorbond is that kind of coated steel with paint baked on. Near calm salt water such as the Parramatta River, BlueScope's guide lists the standard Colorbond finish at any distance but wants Zincalume more than 100 metres away. Neither can touch copper, brass or lead, or take water running off copper or lead.

Key points

  • Both are BlueScope steel: Zincalume is the bare coated sheet, Colorbond is painted
  • Colorbond comes in 22 core colours, and Zincalume has its own bare metallic finish
  • Near calm salt water like the Parramatta River, Zincalume needs more than 100 metres
  • Copper, brass and lead must not touch either, and copper or lead must not drain onto them
  • Every Colorbond core colour except Night Sky carries Thermatech to reflect more heat
  • Ask for the solar absorptance figure of whichever sheet you choose
01

What Colorbond and Zincalume are made of

Zincalume steel is steel sheet coated in an alloy of aluminium, zinc and magnesium, made to the Australian Standard AS 1397. BlueScope calls the current coating Activate technology and says it is designed to slow the rate of corrosion.

Colorbond steel starts from steel with that same kind of coating. BlueScope then adds a pretreatment layer, a primer and a baked-on topcoat of exterior paint, and calls the result five layers of protection.

So you are choosing between the bare coated metal and a painted finish over it. Both are sold as roofing sheet, gutters and flashings.

02

How each one looks on a house

Zincalume has a bare metallic finish. It suits sheds, garages and outbuildings, and houses where you want the look of raw steel.

Colorbond roofing comes in BlueScope's 22 core colours, with some also made in a Matt finish. Gutters, fascia and downpipes come in the same colours, so you can match the roof or pick a contrast.

03

Glare, and what the neighbours see

BlueScope's guidance on reflectivity says every roofing material reflects sunlight, and glare comes mostly from how glossy the finish is. Colour plays a much smaller part, a brand new roof in summer glares the most, and painted steel reflects less as it weathers.

Its Matt Colorbond finish spreads reflected light more than the standard Classic finish. BlueScope says a roof seen mainly from the south can cause glare for long parts of the day. If a neighbour looks down on yours from that side, talk about the finish first.

04

Heat: what each roof soaks up

In hot sun, BlueScope says the surface of a light-coloured roof can run up to 35°C cooler than a dark one. In Western Sydney's hotter summers, the layers under the sheet matter as much as the sheet, as roof colour and heat sets out.

Solar absorptance
The share of the sun's heat a roof soaks up, written as a number from 0 to 1, where lower means a cooler roof. NSW BASIX (the state's building sustainability rules) sorts roof colours into light, medium and dark by this number.
Thermatech
A coating technology in every Colorbond core colour except Night Sky. BlueScope says it reflects more of the sun's heat without changing the colour you see. Each colour's figure is printed on the back of its swatch.
The figure for Zincalume
Ask the supplier for it before you decide. BlueScope's own thermal guidance notes that roofs which look alike can absorb quite different amounts of heat, so compare numbers rather than looks.
05

Salt air: how close to the water each one can go

BlueScope's steel roofing selection guide sets a minimum distance from salt water for each product, measured from the high tide mark. It sorts salt water into breaking surf, exposed water such as Botany Bay, and calm water. The Parramatta River and Darling Harbour are on its calm list.

Well away from the water, salt does not decide between the two. Close to the Parramatta River it does, and BlueScope treats its distances as a guide that local wind and shelter can change.

Zincalume steel
More than 200 metres from breaking surf or exposed water, and more than 100 metres from calm water.
Colorbond steel, Classic or Matt finish
More than 200 metres from breaking surf or exposed water, and any distance from calm water.
Colorbond Ultra steel
BlueScope's heavier duty painted steel for harsher sites, listed from 100 metres of breaking surf or exposed water.
06

What each steel cannot touch

When two different metals touch and get wet, one of them corrodes faster, which is called galvanic or bimetallic corrosion. BlueScope's dissimilar metals bulletin gives the same answers for Colorbond and Zincalume, and lists the two as compatible with each other.

Copper, brass and lead
None of the three can touch either sheet, and water running off copper or lead does damage too. Copper dissolves very slightly in water and settles on the steel, so a dripping copper overflow corrodes the roof under it.
Stainless steel screws
Not compatible with either sheet. BlueScope describes a ring of corrosion about 40 millimetres across forming around stainless screws used on its Colorbond Ultra roofing.
Galvanised flashings
They can be used with both, but BlueScope says they have a shorter life and carry a corrosion risk. Its first choice for flashings is formed Colorbond or Zincalume sheet.
Washers and sealant
BlueScope lists carbon black, a conductive material in some rubber washers, as incompatible with both. It also says to use neutral cure silicone only, because sealants that smell of vinegar or ammonia while curing attack the coating.
07

Cost, and when each one suits

BlueScope describes Zincalume roofing as strong, durable and cost-effective, and the price of either sheet is set by the supplier. On a full re-roof the sheet is one line of the quote, and the rest of the work is the same whichever steel goes on.

Your price for either is confirmed when we measure the roof and write the quote. You can compare profiles and colours under Colorbond roof replacement.

Zincalume suits
Sheds, garages and outbuildings, such as a shed roof replacement, and houses where you want bare metal. The site needs to be more than 100 metres from calm salt water.
Colorbond suits
Houses where you want a colour, or gutters and fascia to match the roof. It also suits a site close to the Parramatta River or other calm salt water.

If this sounds like your roof

We will come and measure it.

Ring and describe what it is doing, and we will book a time to look at it.

(02) 9072 1993

Common questions

Common questions

Is Colorbond just painted Zincalume?

Close to it. Colorbond starts from steel with the same kind of aluminium, zinc and magnesium coating, then adds a pretreatment, a primer and a baked-on paint finish.

Which one keeps the house cooler?

It depends on the colour. BlueScope publishes solar absorptance for each Colorbond colour, so ask the supplier for the Zincalume figure and compare, and check your ceiling insulation either way.

Can I have a Colorbond roof with Zincalume gutters?

Yes. BlueScope's compatibility table lists Colorbond and Zincalume as compatible with each other.

Does either roof need washing?

Rain does most of it. BlueScope says to hose down the areas rain does not reach, such as the underside of eave gutters, at least every six months.

Next step

Find out what your roof will cost

We come out, measure your roof and give you a written quote. The quote says what happens if the timber under the old roof turns out to be worse than it looked. Asking for one does not commit you to anything.

Call (02) 9072 1993Get a quote